Crestron CNX-TS, Operations & Installation Manual

Page: 6 / 24

Single Gang Temperature Sensor Crestron CNX-TS
Specifications
The following table provides specifications for the sensors.
Specifications for the Sensors
SPECIFICATION DETAILS
Power Requirements
24 VDC, 0.010A, .25 Watts
Default Network ID 53
Temperature Range
32
o
F - 113
o
F (0
o
C - 45
o
C)
Control System Update Files
1, 2, 3
2-Series Control System Update Version C2-1001.CUZ or later
CEN/CN-TVAV Update File
Version 5.10.13V.UPZ or later
CNMSX-AV/Pro Update File Version 5.12.63X.UPZ or later
CNRACKX/-DP Update File Version 5.10.11W.UPZ or later
ST-CP Update File Version 4.02.04S.UPZ or later
Dimensions and Weight Height: 4.76 in (12.1 cm)
Width: 2.91 in (5.57 cm)
Depth: 1.40 in (3.56 cm)
4
Weight: 2.60 oz (75 g)
1 The latest software versions can be obtained from the Downloads | Software Updates section
of the Crestron website ( www.crestron.com ). Refer to the NOTE after footnote 4.
2. Crestron 2-Series control systems include the AV2, PAC2, PRO2, RACK2, CP2, and MP2.
3. CNX update files are required for either CNMSX-AV/Pro or CNRACKX/-DP. Filenames for
CNX update files have a UPZ extension, and ST-CP files are in one EXE or zipped UPZ file.
To avoid program problems, make sure you are using the update file with the correct suffix
letter (e.g., S, V, W, X).
4. The depth of the Sensor is listed without the Cresnet connector (approximately 0.45 in) plus
clearance for the wiring.
NOTE : Crestron software and any files on the website are for
Authorized Crestron dealers only. New users may be required to register
to obtain access to certain areas of the site (including the FTP site).
Physical Description
Refer to the illustrations on the next page. The sensor unit consists of a
Cresnet circuit board, a rear speaker, and a male port (standard Cresnet
network port labeled 24 Y Z G). The port provides operating power and
communications to/from the sensor.
2
•
Single Gang Temperature Sensor: CNX-TS Operations & Installation Guide - DOC. 8191