Crestron
CEN-ERFGW-POE
Extended Range Wireless Gateway
Configuration
Manager
Configuration Manager is the view where programmers “build” a
Crestron control system by selecting hardware from the
Device Library
.
1. The CEN-ERFGW-POE must first be incorporated into the system.
a. To incorporate the CEN-ERFGW-POE (Cresnet) into the
system, drag the CEN-ERFGW-POE (Cresnet) from the
Wireless Receivers | Wireless Receivers (RF) folder of the
Device Library
and drop it in the
System Views.
b. To incorporate the CEN-ERFGW-POE (Ethernet) into the
system, drag the CEN-ERFGW-POE (Ethernet) from the
Wireless Receivers | Wireless Receivers (RF) folder of the
Device Library
and drop it in the
System Views.
Locating the CEN-ERFGW-POE in the Device Library
The system tree of the control system displays the device in the
appropriate slot with a default Net ID or IP ID, as shown in the
following illustration.
NOTE:
In the following illustration, there is both an Ethernet
device in Slot 8 and a Cresnet device in Slot 9. It is possible to
have both types of device attached to a control system as long as
the control system has either a built-in or expansion Ethernet
interface. If Cresnet operation is desired, the IP table for the
CEN-ERFGW-POE must be empty.
NOTE:
A single CEN-ERFGW-POE should be on either Cresnet
or Ethernet but not both.
Operations & Installation Guide – DOC. 7158A
Wireless Gateway: CEN-ERFGW-POE
•
15
