Crestron
CEN-ERFGW-POE
Extended Range Wireless Gateway
Hardware Hookup
Make the necessary connections as called out in the illustrations that
follow this paragraph. Refer to “Network Wiring” on page 10 before
attaching the 4-position terminal block connector. Apply power after all
connections have been made.
NOTE:
Power should be supplied through either the
LAN PoE
port or
the
NET
port but not both.
When making connections to the CEN-ERFGW-POE, use Crestron
power supplies for Crestron equipment.
Hardware Connections for the CEN-ERFGW-POE (Top View)
Antenna:
For Included Antenna
Hardware Connections for the CEN-ERFGW-POE (Bottom View)
LAN PoE:
10BASE-T / 100BASE-TX
Ethernet to LAN
NET:
To Control System and
Other Cresnet Devices
NOTE:
Antenna must be attached directly to the antenna connector.
Alternatively, it can be extended with an optional ANT-EXT-5 or
ANT-EXT-10 Antenna Extender (both sold separately).
NOTE:
Although both the
LAN PoE
and
NET
ports can be used for
configuration, there can only be one control connection to the control
system.
Operations & Installation Guide – DOC. 7158A
Wireless Gateway: CEN-ERFGW-POE
•
13
