Camera Interface, Digital Servo Pan Tilt Head
Crestron
C2N-CAMIDSPT
14
•
Camera Interface, Digital Servo Pan Tilt Head: C2N-CAMIDSPT
Operations Guide - DOC. 6262A
the first eight digits of each line constitute the TSID number (hexadecimal
form of the serial number).
5. As you enter either the serial number or TSID number of the device that
requires a change, the corresponding TSID or serial number automatically
appears in its appropriate field, and the list scrolls to and highlights the
device listing. The listing should show the device’s current Cresnet ID.
6. Enter the Cresnet ID that the device should be set to and click
OK
. The
number you enter should appear on the list.
CAUTION:
This function does not prevent you from setting duplicate IDs. Be sure
to check current assignments before entering the desired Cresnet ID number.
Serial Number to TSID Conversion
This utility is useful in a case where there are multiple devices of the same type on a
network, you need to locate a particular one, you know the TSID but not the serial
number, and your site installation list is based on device serial numbers. In this (or
the reverse) situation, do the following:
1. Open the Crestron Viewport.
2. From the Viewport menu, select
Functions | Serial Number
ÅÆ
TSID
Conversion Tool
. The “Serial Number
ÅÆ
TSID Conversion Tool”
window is displayed. (Refer to the following figure.)
“Serial Number to TSID Conversion Tool” Window
3.
Enter the serial number or TSID number as instructed; press the
appropriate button to obtain the corresponding number.
NOTE:
Enter serial numbers, including spaces, exactly as they appear on the unit
label. Alpha characters in serial numbers or TSID numbers may be entered in upper
or lower case.
Camera/Lens Mounting
The CAMIDSPT should be mounted with its pan hub attached to a flat horizontal
surface that will support the combined weight of the unit and the camera/lens
assembly plus the interface cables. The unit can be mounted directly, or it can be
attached to optional mounts, C2N-CAMI-WMT or C2N-CAMI-CMT, which are
available for wall or ceiling mount configurations, respectively. The unit’s operation
