Crestron AM-100
AirMedia Presentation Gateway
Operations Guide – DOC. 7463B
AirMedia Presentation Gateway: AM-100
•
21
Code
An access code can be used to limit access to the AM-100. The code
feature can be disabled, randomly generated, or fixed to a specific value.
To specify how access codes are used. Select one of the following
options from the “Code” menu:
•
Disabled
— Any user with the AM-100’s IP address or hostname
can open a client connection without entering an access code.
•
Random
— The AM-100 can randomly generate an access code. A
new code is generated when the last connected presenter
disconnects from the AM-100. The access code is displayed on the
top-right of the
AM-100 Welcome
screen as shown on page 16.
•
Use the following code
— The AM-100 can display a user-
specified, four-digit, access code. The access code is displayed on
the top-right of the
AM-100 Welcome
screen as shown on page 16.
To apply any changes, click
Apply
. To cancel, click
Cancel
.
Network Setup
Click
Network Setup
to configure the AM-100’s parameters for
operating in a network environment.
