Crest Audio HP-EIGHT, Owner'S Manual

Page: 31 / 84

p. 31
stereo inputs
channel muting features
MUTE
Pressing this switch will mute the stereo feed to any of the assigned buses and
any Aux sends.
MUTE LED
The associated red-LED will light when the stereo channel is muted.
bus assignment features
The bus assignment section offers considerable flexibility for creating what even-
tually becomes the main output mix. Stereo Inputs can be assigned to the inde-
pendent Mono bus, the Left-Right buses, or any of the odd-even paired subgroups
(1-2, 3-4, 5-6, 7-8).All assignments are derived post-fader, post-eq, and post-mute.
Since these are stereo inputs, the assignments are done in stereo: the left-side
input signal is assigned to the left and odd buses, the right-side signal is assigned
to the right and even buses.The Mono bus is fed from a summed mix of the left
and right-side input sources.
Bus Assign
M (Mono)
Assigns the summed, post-fader channel signal to the Mono Bus. The pan-pot
position does not affect the signal to the Mono bus.
L-R (Left- Right)
Assigns the post-fader, pan-pot signals to the Left and Right Buses.
1-2 (Groups 1-2)
Assigns the post-fader, pan-pot signals to the Group 1 and Group 2 Buses.
3-4 (Groups 3-4)
Assigns the post-fader, pan-pot signals to the Group 3 and Group 4 Buses.
5-6 (Groups 5-6)
Assigns the post-fader, pan-pot signals to the Group 5 and Group 6 Buses.
7-8 (Groups 7-8)
Assigns the post-fader, pan-pot signals to the Group 7 and Group 8 Buses.
L E D
2