Crest Audio HP-EIGHT, Owner'S Manual

Page: 15 / 84

p. 15
mono input
EQ
features
Many audio signals coming into the console require some degree of corrective
equalization in order to be part of a good sounding mix.
The input EQ consists of four-bands: high, high-mid, low-mid and low.
The high and low bands have fixed frequencies while the high-mid and low-mid
bands are sweepable, with their higher and lower frequencies overlapping adja-
cent bands.
high frequency —HF
15dB boost and cut at 12kHz—Shelving Response.
high-mid frequency —HM
Selectable frequency range of 500Hz to 10 kHz.
The response is bell-shaped with a fixed Q of 1.5
15dB boost and cut centered at the selected frequency.
low-mid frequency —LM
Selectable frequency range of 100Hz to 2kHz.
The response is bell-shaped with a fixed Q of 1.5
15dB boost and cut centered at the selected frequency.
low frequency —LF
15dB boost and cut at 80Hz—Shelving Response.
eq on
Equalizer is off. The EQ circuits are bypassed.
Equalizer is on. This switch can be used to make A/B comparisons between
"flat" and eq'd signals.
1