Crest Audio HP-EIGHT, Owner'S Manual

Page: 17 / 84

p. 17
mono input
aux
send features
Ten aux sends are available for creating individual output mixes.These mixes can
be used for driving effects processors, providing monitor mixes, creating broad-
cast or alternate sound reinforcement mixes, or other special requirements.With
the corresponding PRE switches in the UP position, the Aux sends are fed from
the Post-fader channel signal. When the PRE switch is depressed, the corre-
sponding Aux sends are fed from the Channel’s Post-EQ, Pre-fader signal. An
internal option allows the user to change this “PRE” point to the Pre-Insert, Pre-
EQ signal on a channel-by-channel basis.All Aux sends are affected by the chan-
nel Mute switch.
aux sends 1–6
These knobs adjust the amount of signal sent to the corresponding
AUX
buses. Unity gain occurs at the zero setting, with 6dB additional gain available
above that.
PRE ( aux 1–6 )
The default signal source for these Aux sends is post-fader.This switch is used for
selecting the Pre-fader signal for Auxes 1-6.The normal Pre-fader signal is derived
Post-EQ.
see internal jumper options
Aux sends are Post-EQ, Post-fader.
Aux sends are Post-insert, Post-EQ, Pre-fader.
aux sends 7-8 and 9-10
These knobs adjust the amount of signal sent to the corresponding
AUX
buses. Unity gain occurs at the zero setting, with 6dB additional gain available
above that.
PRE ( aux 7–8 & aux 9–10 )
The default signal source for these
AUX SENDS
is post-fader.These switches are
used for selecting the Pre-fader signals for Auxes 7-8 & 9-10.The normal Pre-
fader signal is derived Post-EQ.
see internal jumper options
Aux sends are Post-EQ, Post-fader.
Aux sends are Post-insert, Post-EQ, Pre-fader.
1