cressi.com
ALARM OF THE SUM OF THE DIVING TIME AND THE SURFACE TIME FOR DYNAMIC PROGRAM.
The alarm of the sum of the diving time and the surface time for the DYNAMIC program has the main
purpose of supporting the diver who practice repeated dives in the pool or who needs a precise cadence
practising the activity in the sea. In this way, he will have a time parameter available to speed or decrease
his gaits or to repeat the surface-diving cycle. The computer must be set with the DYNAMIC program. To
set the alarm scroll with UP or DOWN buttons until the ALARMS menu. Enter the menu by pressing the
MODE button. The numbers in the top left of the display below the MAX indicator will flash. Press the
MODE button again. The display will show only the highlighted information and the minutes indicator will
flash. Set the desired value by pressing the UP or DOWN buttons. Confirm the set value by pressing the
Mode button until hearing an acoustic signal of confirmation. The second figures will flash.
Set the desired value by pressing the UP or DOWN buttons. Confirm the set value by holding down the
Mode button for a few seconds until hearing an acoustic signal to confirm the exit from the menu.
Alternatively, after some seconds the buttons are pressed, the computer will automatically register the
changes carried out at that moment by issuing an acoustic signal to return then to the main screen.
Once the alarm has been set, the display will indicate that the sum of diving and surface times set has
elapsed by making it flash and, if the audible alarms have been set, an acoustic signal will also sound.
SURFACE TIME ALARM FOR
DYNAMIC AND STATIC PROGRAMS.
The alarm of the surface time for STATIC and DYNAMIC programs has the main purpose of supporting the
diver who performs, for example, the tanks or repeated dives in the pool. In this way, he will have a time
parameter available to speed or decrease his gaits or to recover the energy properly keeping certain
benefits.
The computer must be set with the DYNAMIC or STATIC program.
DYNAMIC:
To set the alarm scroll with UP or DOWN buttons until the ALARMS menu. Enter the menu by
pressing the MODE button. The numbers in the top left of the display below the MAX indicator will flash.
Press the UP button once. The numbers in the top right below the word SURF.T MAX will flash. Press the
MODE button again. The display will show only the highlighted information and the minutes indicator will
flash. Set the desired value by pressing the UP or DOWN buttons. Confirm the set value by pressing the
Mode button until hearing an acoustic signal of confirmation. The second figures will flash. Set the desired
value by pressing the UP or DOWN buttons. Confirm the set value by holding down the Mode button for a
few seconds until hearing an acoustic signal to confirm the exit from the menu. Alternatively, after some
seconds the buttons are pressed, the computer will automatically register the changes carried out at that
moment by issuing an acoustic signal to return then to the main screen.
Once the alarm has been set, the display will indicate that the surface time set has elapsed by making it
flash and, if the audible alarms have been set, an acoustic signal will also sound.
STATIC:
To set the alarm scroll with UP or DOWN buttons until the ALARMS menu. Enter the menu by
pressing the MODE button. The numbers in the top right below the word SURF.T MAX will flash. Press the
MODE button again. The display will show only the highlighted information and the minutes indicator will
flash. Set the desired value by pressing the UP or DOWN buttons. Confirm the set value by pressing the
Mode button until hearing an acoustic signal of confirmation. The second figures will flash. Set the desired
value by pressing the UP or DOWN buttons. Confirm the set value by holding down the Mode button for a
few seconds until hearing an acoustic signal to confirm the exit from the menu. Alternatively, after some
seconds the buttons are pressed, the computer will automatically register the changes carried out at that
moment by issuing an acoustic signal to return then to the main screen.
Once the alarm has been set, the display will indicate that the surface time set has elapsed by making it
flash and, if the audible alarms have been set, an acoustic signal will also sound.
ALARM OF THE SUM OF THE DIVING TIME AND THE SURFACE TIME FOR DYNAMIC PROGRAM
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
LONG
LONG
ALARMS: SURFACE TIME ALARM FOR DYNAMIC AND STATIC PROGRAMS
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
DYNAMIC:
STATIC:
17
