ENGLISH
INSTRUCTION FOR USE
Figure 7
Battery charging
16.
Charge the batteries. (See procedures in maintenance chapter).
BRUSH/PAD-HOLDER INSTALLATION AND UNINSTALLATION
NOTE
Install either the brush (A, Figure 8) or pad-holder (B and C, Figure 8) according to the type of floor to
be cleaned.
CAUTION!
Before installation or uninstallation of brush or pad-holder, make sure all the switches on
machine are in off position and lifting up the squeegee from the floor. The operator must be
equipped with suitable personnel protection devices such as gloves to reduce the risk of
accidents.
Proceed as following:
1.
Make sure that the power switch (45) is turned to off position
“o”
.
2.
Lift the tank (25) by prying the handlebar (2).
3.
Rotate the brush (A, Figure 8) or the pad-holder (B/C, Figure 8) in clockwise (direction of arrow mark D, Figure
8) to install it to the deck.
4.
Rotate the brush or the pad-holder in counterclockwise (direction of arrow mark E, Figure 8) to uninstall it from
the deck.
Figure 8
ADJUSTING THE BALANCE OF SQUEEGEE
1.
Install the squeegee and screw up the nut (16), then connect the vacuum hose (11) to the squeegee.
2.
Adjust the squeegee by squeegee adjusting handle (A, Figure 9).
10
