European Compliance
This product conforms to the following:
EMC Directive 2004/108/EC.
Mains operated products for the European market comply with Low Voltage Directive 2006/95/EC and Commission
Regulation(s) Implementing Directive (2005/32/EC).
Communication / RF wireless products for the European market comply with R&TTE Directive 1999/5/EC.
CAUTION:
To comply with the Europe CE requirement, this device must be installed with CE certified computer equipment
which meet with Class B limits.
All cables used to connect this device must be shielded, grounded and no longer than 3m in length. Operation
with non-certified computers or incorrect cables may result in interference to other devices or undesired effects
to the product.
MODIFICATION:
Any changes or modifications not expressly approved by Creative Technology Limited or one of its affiliated
companies could void the user’s warranty and guarantee rights.
Safety & Regulatory Information
The following sections contain notices for various countries:
CAUTION:
This product is intended for use with FCC/CE certified computer equipment. Please check the equipment
operating/installation manual and/or with the equipment manufacturer to verify/confirm if your equipment is
suitable prior to the installation or use of the product.
Federal Communication Commission (FCC) Interference Statement
FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
CAUTION:
To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be
installed with computer equipment certified to comply with Class B limits.
All cables used to connect to the computer and peripherals must be shielded and grounded. Operation with non-
certified computers or non-shielded cables may results in interference to radio or television reception.
MODIFICATION:
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority
to operate the device.
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
