Connect your receiver 5
Step 3: Connect your receiver
NOTE
The receiver’s Mode switch is set to “AUTO” by default and this
should work in most cases. However, if you do encounter
difficulties pairing your transmitter and receiver after doing the
steps in the following pages, you can set your switch according to
the transmitter you are using:
Mode 1 : For Xdock Wireless or Xmod Wireless
Mode 2 : For MovieWorks HD or Sound Blaster X-Fi Notebook
LINK/
CONNECT
1 AUTO 2
5v DC
LINE
OUT
OR
3a
3b
1b
2
1c
1a
1a
Powered stereo or 2.1 speakers
1b
Stereo to RCA cable
1c
Stereo cable
2
Mode switch (see Note below)
3a
Power adapter
3b
Power outlet