Turn on your receiver 8
Step 5: Turn on your receiver
Your transmitter and receiver pair (connect wirelessly) automatically when
turned on. The Link LED, at the back of the receiver, flashes and then lights
up green when pairing is successful.
NOTE
If your transmitter and receiver do not pair, simply reset them. On
one unit at a time, press and hold the Connect button for five
seconds. You can set the Mode switch (see “Connect your receiver”
on page 5) and then try pairing again. For more troubleshooting
information, see “Troubleshooting Wireless Features” on page 21.
1 auto 2
5V DC
LINK /
CONNECT
1 auto 2
5V DC
LINK /
CONNECT