Using Your Receiver 16
Using Your Receiver
Turning on your receiver or enabling Standby mode
Press the Power/Standby button on your remote control to turn on the
receiver, or enable Standby mode.
Returning to factory default settings
Return to the factory default settings if you want to
• revert to the original volume setting,
• reset your zone numbering sequence, or
• “unpair” a receiver.
Press and hold the Previous/Rewind and Next/Fast forward buttons on your
receiver together for five seconds. The Power LED goes off for two seconds
before lighting up again.
NOTE
You can also use the Play/Pause button
on your receiver. See
“About Your Receiver” on page 2.
NOTE
The receiver pairs with your transmitter automatically if both
return to factory default settings.