Setting Up Your NOMAD IIc Player 2-5
Step 6: Install NOMAD II
Driver
NOMAD IIc uses the "NOMAD II"
driver.
Skip this step if you are a Macintosh
user; installing the software as
instructed in “Step 4: Install Software”
on page 2-2, would have already
installed the drivers necessary for your
NOMAD IIc to work with your
Macintosh.
For Windows users only
Once you have connected your NOMAD IIc
player to your PC,
the dialog box similar to
Figure 2-3 appears.
1. Click the
Next
button.
2. Select the
Search for the best driver for
your device. (Recommended)
option and
click the
Next
button.
3. Clear the
Floppy disk drives
check box
and select the
CD-ROM drive
option.
4. Click the
Next
button twice in succession.
The dialog box similar to Figure 2-4
appears.
5. Click the
Finish
button.
Step 7: Verify Correct
Installation of NOMAD II
Driver
For Windows users
1. Click
Start
->
Settings
->
Control Panel
.
2. In the
Control Panel
window,
double-click the
System
icon.
3. In the
System Properties
dialog box,
click the
Device Manager
tab.
4. In the
Device Manager
tabbed page,
double-click
Universal Serial Bus
controllers
, and then check that
Creative
NOMAD II
is present as shown in Figure
2-5 below.
Figure 2-3:
Add New Hardware Wizard
dialog
box.
Figure 2-4: Installation of Creative NOMAD II
driver is completed.
Figure 2-5: Verify that Creative NOMAD II
driver is installed correctly.