Configuring Settings 4-2
5. When the
Profile Edit
dialog box
appears, click the
Encryption
tab
(Figure 4-2).
To configure WEP
6. Click the
Authentication
box and
select
Auto
.
7. Click the
Data Encryption
box
and select
WEP
.
8. Click the
Key Length
box and
select
64
or
128
bits.
9. Select the
Hex
or
ASCII
option.
10. Type either
Hex
(10 or 26
characters) or
ASCII
(5 or 13
characters) values. These keys
serve as passwords that encrypt
your data before transmission.
11. Click the
OK
button.
To configure WPA-PSK
6. Click the
Authentication
box and
select
WPA-PSK
.
7. Click the
Data Encryption
box
and select
TKIP
or
AES
.
8. In the
Pre-shared Key
box, type
a password, which encrypts your
data before transmission.
9. Click the
OK
button.
Figure 4-2
It is recommended
that you set up WEP or
WPA-PSK encryption.
This can help prevent
unauthorized users
from accessing your
network. For more
information on
encryption settings,
refer to "Configuring
Settings" on page 4-1.
Summary of Contents for Network Blaster CW2230
