Installing Your USB Adapter 2-1
Installing Your USB Adapter
Installing the
Driver and
Network
Blaster
Wireless USB
Adapter Utility
DO NOT
connect the USB adapter to your computer before installing the software.
You will be required to do so halfway through the installation.
1. Turn on your computer and insert the Installation CD into your CD-ROM/
DVD-ROM drive. Your CD should start automatically. If it does not, follow the
steps below:
i.
Start Windows Explorer.
ii.
On the left pane, click the
My Computer
icon.
iii. Right-click the CD-ROM/DVD-ROM drive icon, and then click
Autoplay
.
2. Click the
Install Software
option.
3. Select the drivers and applications to install, and then click the
OK
button.
4. When the
Creative Network Blaster Wireless USB Adapter Utility
dialog
box appears, click the
Next
button.
5. In the next dialog box that appears, click the
Next
button.
6. In Windows XP, when the
Creative Network Blaster Wireless USB Adapter
Utility
dialog box similar to Figure 2-1 appears, click the
OK
button.
Windows 98 SE users
may be prompted to
insert their Win 98 SE
installation CD during
installation. If so,
insert the Win 98 SE
installation CD into
your CD-ROM/DVD-
ROM drive, and then
click the
OK
button.
Figure 2-1
Summary of Contents for Network Blaster CW2230
