Installing and Testing Modem Drivers 3-10
Testing the
Installation in
Windows 2000
1.
Click Start -> Settings -> Control Panel.
2.
Double-click the Phone and Modems icon. The Phone
and Modem Options dialog box in Figure 3-16 appears.
3.
Click the Modems tab, then click the Properties button.
The Creative Modem Blaster USB Properties dialog
box appears.
4.
Click the Diagnostics tab, then click the Query Modem
button to display the response status of your modem
(Figure 3-17).
If your modem is not responding, it may be due to a
conflict between the modem and another peripheral
device. To resolve the conflict, you must change the
settings on your modem (see “Resolving Hardware
Conflicts” on page B-2).
Figure 3-16 : Phone and Modem
Options dialog box.
Figure 3-17 : Creative Modem
Blaster USB
Properties dialog box.
Summary of Contents for Modem BLASTER USB DE5771
