20 3D Blaster™ RIVA TNT2™ M64
Solution
Update the device drivers to 3D Blaster RIVA TNT2 M64 drivers:
1. Right-click your desktop, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, click the Settings tab.
3. On the Settings tabbed page, click the Advanced Properties button.
4. In the Advanced Display Properties dialog box, click the Change button.
5. In the Select Device dialog box, click the Have Disk button.
6. Insert the 3D Blaster RIVA TNT2 M64 CD into your CD-ROM drive.
7. Follow steps 6 through 13 of the procedure in “To install in Windows 98” on
page 8 to complete the update.
Other Display Problems
Monitor display flickers or the screen goes blank after Windows starts.
Cause
Your monitor may not support the resolution or refresh rate that you have set.
Solution
Use display settings supported by the monitor.
To change the display settings:
1. Restart your system in Windows 98 Safe mode. To do so:
i.
Restart your system and when the message “Starting Windows 98...”
appears, press <F8>.
A list of options such as Safe Mode and Command Prompt Only Mode
appears.
ii. Select Safe Mode and press <Enter>.
2. After your system has restarted, right-click the desktop and click Properties.
3. In the Display Properties dialog box, click the Settings tab.
For the resolutions supported by
your monitor, refer to its manual.
