background image

MODELS PS10CLATL & PTCLATL

ASSEMBLY MANUAL

If you have problems or questions about your Creative Playthings Play Set,

DO NOT CALL THE RETAILER.

Contact Creative Playthings Customer Service at 1-800-598-4997 or

[email protected]

Please read the owner’s manual before assem-

bling your Play Set, it provides additional 

information on the care and use of your Play 

Set.

You must carefully read the entire instruction 

manual before proceeding with the assembly 

or use of your new Play Set.

Creative Playthings takes great care to design 

its products with your child’s safety in mind. 

However, only with careful supervision 

and proper safety instructions, can you be 

assured of safe play time on any product 

designed for children.

By

This product is intended for single 

family home/residential use only and 

not intended for use in any public 

setting. Placement in any public 

setting constitutes a misuse of this 

product.

All hardware on this set is specially coated 

for corrosion resistance.

If non-Creative Playthings hardware is used, 

it must be galvanized or stainless steel.

The swing accessories provided with your set 

may be different than those shown above.

Summary of Contents for Playtime PS10CLATL









Reviews: