60084-101 MonkEY BArS
19865-100 rev C (09-17)
© Copyright 2014, Creative Playthings, Printed in U.S.A.
Page 3
aSSEMBLy InSTruCTIOnS
STEP 1 – assemble Top Ladder:
Fit five 15" rungs (n) into the holes in the Left Top
Ladder rail (E) and the right Top Ladder rail (F).
Set the assembly flat on a solid surface. Make
sure that the rungs are completely inserted with
the ends of the rungs snug against the bottom of
the holes.
Use #10 x 2-1/2" Self-Drilling Screws, through
the holes provided, to fasten the rungs in place.
The Self-Drilling Screws have a drill-bit tip. Point
the screw toward the center of rung diameter and
press firmly. Do not sink the head of the screw
beyond flush with the surface of the wood.
STEP 3 – Base rail:
Flip the End Ladder so the Self-Drilling Screws face down.
Fasten the Base rail (A) to the End Ladder using 1/4 x 3"
Hex Bolt Assemblies with Short Weld nuts as shown at
right.
1/4 x 3" Hex Bolt w/
Short Weld nuts
#10 x 1-1/2" Self-
Drilling Screws
#10 x 2-1/2" Self-
Drilling Screws
STEP 2 – assemble End Ladder:
Fit four 18" rungs (o) into the holes in the Left End Ladder
rail (B) and the right End Ladder rail (C). Set the assembly
flat on a solid surface. Make sure that the rungs are
completely inserted with the ends of the rungs snug against
the bottom of the holes.
Use #10 x 1-1/2" Self-Drilling Screws, through the holes pro-
vided, to fasten the rungs in place. Do not sink the head of
the screw beyond flush with the surface of the wood.
F
C
A
E
n
B
o
