© Copyright 2016, Creative Playthings
NORFOLK II
19944-200 Rev E (01-19)
Page 12
ASSEMBLY INSTRUCTIONS
STEP 9 – Step Leg:
Slide the Step Leg (X) into place between the
back Main Beam and the back Inside Beam
as shown. Place the angled face of the leg
flush to the back right Post and align the holes
with the holes in the Main Beam.
Fasten the Step Leg to the back Main Beam
with 3/8 x 4" Hex Bolt Assemblies using the
Weld Nuts inserted previously.
STEP 10 – Rock Base Rail:
Fasten the Rock Base Rail (C) to the Step
Leg as shown, using two 5/16 x 4" Hex Bolt
Assemblies.
STEP 11 – Right Front Leg:
Slide one Left Leg (AA) into place between
the front Main Beam and the front Inside
Beam as shown. Place the angled face of the
leg flush to the front right Post and align the
holes with the holes in the Main Beam. The
counter-bored holes should face down.
Fasten the Leg to the back Main Beam with
3/8 x 4" Hex Bolt Assemblies.
Fasten the Leg to the Rock Base Rail
as shown, using two 5/16 x 4" Hex Bolt
Assemblies. Tighten and hammer so the
Weld Nuts are flush with surface of this Leg.
C
AA
3/8 x 4" Hex Bolt
5/16 x 4" Hex Bolt
5/16 x 4" Hex Bolt
X
Right side of the Gym
3/8 x 4" Hex Bolt
Tighten and hammer so Weld Nuts are
flush with surface of this Leg
