© Copyright 2005, Creative Playthings
LEXINGTON WITH WOOD ROOF
19686-300 Rev Q (09-20)
Page 10
ASSEMBLY INSTRUCTIONS
STEP 3 — First Tower Side:
Raise one tower assembly on edge.
Secure one end of a Sandbox Side (Q)
to the corner post using two 4" hex
bolt assemblies. (Align the blind holes
nearest to the bottom of the posts).
Raise one side of the other assembly
about 6-1/2 feet from the first and se-
cure the next end of the sandbox side
to it in the same way.
Move to the middle of the posts and
secure one Platform Side (O) using
four 4" hex bolt assemblies, two at
each end. Make sure the holes along
the edge of the board align closer to
the bottom of the posts.
Fron
t
Back
STEP 4 — Raise Tower, Install Ends:
Lift the top of the tower and settle the tower onto
its base.
Mount the remaining Platform Side (O) using four
4" hex bolt assemblies, two at each end.
Finish the tower base by installing the second
Sandbox Side (Q) Using four 5/16 x 4" hex bolt as-
semblies.
O
Q
Q
O
5/16 x 4" Hex Bolts
5/16 x 4"
Hex Bolts
