CreatBot DX, User Manual

Page: 10 / 34

- 10 - - 11 -
Printer Operation
LCD Menu Leveling Platform
Printer Operation
Display while printing
Move axis
Preheat
Preheat ABS
Preheat PLA
Cooldown
Preheat nozzle 2
Preheat nozzle 1
Preheat nozzle 3
Preheat hotbed
Preheat All
Auto home
10 mm
1 mm
0.1 mm
X axis
Y axis
Z axis
Filament
Extruder 2
Extruder 1
Unload 1
Unload 2
SD card
Setting
Leveling bed
Temperature
Motion
Save setting
Factory setting
Firmware Ver .
Time used
Xsteps/mm
Ysteps/mm
Zsteps/mm
Esteps/mm
Reg. Number
Tune
Change filam.
Pause print
Cancel print
S
ta
tu
s
1. Enter setting menu->leveling bed, waiting for the platform back to home.
2. Adjust first leveling nut, make nozzle close to the platform.
3.
Press Up/Down button or rotating knob, adjust other three leveling nut.
4 . To adjust repeatedly , eventually distance ( 0 . 2mm ) to insert a name card is
advisable .
5
. All the leveling nut should uniform , nozzle can ' t too close to the platform .
6
. All will be subject to the actual effect of print, please make more little adjust at
the beginning of printing.
1
2
3
4
Platform need paste masking paper or
Kapton to achieve best viscosity, and the
model will be firmly fixed on the platform .
Kapton is double - sided tape , please tear
film on both sides .
Paving Masking Paper