21
Activate the USER button in order to switch between Factory
and User-Bank. Please note, that you can only switch, when
PRESET has been activated.
The second function of the USER button will be activated by
pressing for longer time. In this case all visible parameters of
the hardware will be stored as they are. Invisible parameters
will be set to their basic value.
Activate the STORE button to safe a preset. The LED starts
blinking. Now choose a preset number either by turning the
Data-Reel or by using the UP/DOWN buttons and then press
STORE again. On this the LED start flickering – please press
STORE button until the LED turns off. The preset is now
stored under the chosen preset number.
Effects
Activate the BYPASS button to bypass any
effects. Depending on your adjustments
made the signal without effects might be a
little bit louder than with effects turned on.
On activated BYPASS the LED will be
lightened and no effects are being heard. Pushing the button
again will deactivate the bypass function again.
Activate the PROGRAM button to choose the desired effect
algorithm by using the Data-Wheel or with the UP/DOWN
buttons. In total you can choose between 5 modes for the two
effects (Chorus & Delay). The parameters for the effects
(PARAM 1 to 3) are different for every program.
Summary of Contents for MINIMAX ASB
Page 1: ...1 Owners Manual MINIMAX ASB ...
