Creality CR- 10, User Manual

Page: 15 / 24

10
4. Repeat above steps 1- 2 times if necessary.
1. Prepare →Auto Home. Waiting for the nozzle to move to the left/front of the platform.→ Prepare→Disable Steppers(Close stepper drive，release
motor）
2. Move the nozzle the front/left leveling screw and adjust the
platform height by turning the knob underneath. Use a piece of
A4 paper (standard printer paper) to assist with the adjustment,
making sure that the nozzle lightly scratches the paper.
3. Complete the adjustment of the screw on all 4 corners.
1111111
11111
The nozzle is too far away from the
platform, so the consumables can not
adhere to the platform.
Filament are extruded evenly, just
sticking on the platform.
The nozzle is too close to the platform,
and the filament are not extruded
enough, even scraping the platform.
1 2
3 4
10.Platform Adjustment