TECHNICAL DOCUMENTATION
9
A56V1_90020_D_EN
Installation
Mechanical mounting
Install
i4Gen
position at eye level and at brightness-less location.
Frame cut-out (hxl): 160x242mm (6.3x9.5in).
Chassis Fixed Parts
1. Insert corresponding edges of the fixed part into the slots until
them matched.Make sure the fix part is installed in the way the
photo shows, with protruding tips upwards.
2. The models that support this fixing mode have pairs of slots
reserved on both sides of the system. User can choose the height or
position of installing spot.
3. Insert corresponding edges of the fixed part into the slots until
them matched. Tightening up the screw so that the fixed part can be
fitted into the slots tightly. Install other fixed parts to the system in
the same way.