CRE I4GEN, Technical Documentation Manual, Page: 13 / 45

TECHNICAL DOCUMENTATION
13
A56V1_90020_D_EN
Communication
Pre-requisite
To be able to establish communication between the i4Gen and the controller, the network addresses of both
devices must be configured:
·
The i4Gen network configuration can be done from the i4Gen " Network " settings page (see Network
chapter).
·
The controller network configuration can be done from the controller front panel or controller website or
via
CRE Config software.
If the i4Gen and the controller are connected directly, the network configuration of both devices has to be
compatible:
·
The IP address by default of the i4Gen is: 192.168.11.50
·
The IP address by default of CRE Technology controllers is: 192.168.11.1
These two addresses are in the same subnet (first 3 identical numbers), the i4Gen and the controller can
communicate together.