TECHNICAL DOCUMENTATION
31
A56V1_90020_D_EN
Supervision pages
Supervision part displays controller measures in real time.
Press supervision icon to open the menu that gives access to all supervision pages
(see image
below)
.
1.
Power plant:
Display of information passing through the CRE link (CAN inter GENSYS) between the
different controllers of the power plant.
2.
Generator:
Display of electrical measures of the generator.
3.
Bus/Mains:
Display of electrical measures of the bus/mains.
4.
Engine:
Display of engine measures and J1939 measures
(if a J1939 manufacturer has been
configured)
.
5.
Synchro:
Display of synchronization information.
6.
Inputs/Outputs:
Display of digital inputs/outputs, analog inputs and CANopen inputs/outputs
(if
configured)
.
7.
Timers:
Display of the controller timers.
8.
Maintenance:
Display of maintenance cycles of the controller
(it's possible to reset the cycles to zero
in password level 1).
9.
Info:
Display of the customizable page of the
i4Gen
.Variables can be displayed according to their
addresses.