TECHNICAL DOCUMENTATION
41
A56V1_90020_D_EN
Network
The "
Network
" page retrieves and displays the
i4Gen
and the controller network configuration when the
page opens, and allows you to change this configuration:
There are two different types of configuration:
·
DHCP Configuration (automatic):
If the
i4Gen
is connected to a DHCP server, you can enable the
"
DHCP
" setting to automatically assign an IP address to the
i4Gen
.
·
Manual Setup:
To manually configure the
i4Gen
network settings, disable the "
DHCP
" setting, then fill
in the "
IP address
" and "
Subnet Mask
" fields.
For most networks, it is not necessary to inform the gateway. For complex networks, contact your network
administrator to make the correct configuration.