Crathco PIC-1-DC, Operation And Instruction Manual

Page: 6 / 26

Crathco Powdered Beverage Dispensers Page 6
Drink Strength Adjustment (Refer to Figure A)
Tools Required: #2 Phillips Screwdriver
Warning: Risk of Electric Shock! Always turn
off power to machine while servicing or
making internal adjustments to machine.
1. Dispense a drink to determine if drink is too
strong or too weak.
2. Turn off power to machine at power switch.
3. Remove upper front splash cover below
dispense heads in front of machine.
4. Using a flat head screwdriver, adjust individual
dispense heads by rotating appropriate
adjustment knob. Turn on power to machine and
dispense a drink to determine if drink strength is
acceptable. If drink is not acceptable, turn off power
to machine and repeat adjustment steps until
desired drink strength is achieved. Note: Clockwise
rotation will result in a stronger drink and
counterclockwise will result in a weaker drink.
Note: Water flow rate is factory preset at
approximately 0.80 ounces per second.
Figure A