Craster BU FH2101, Manual

Page: 9 / 15

Flow Heating Unit Manual
Company Address
Craster Ltd
Great Western Studios, 65 Alfred Road
London W2 5EU
Company Info
VAT Reg No. 599599046
Registered in England
Company No: 4503732
UK Telephone
+44 (0) 203 004 4750
USA Telephone
+1 732 543 7862
Email
info@craster.com
Web
www.craster.com
INSTALLATION AND OPERATION / 9
5
Installation and operation
5.1
Safety information
WARNING! Risk of electrocution!
The device may only be operated when connected to a properly installed single socket with protective
contact.
Do not pull the plug from the socket by the cable.
The power cord must not come into contact with hot parts.
• Make sure that the cable does not come into contact with heat sources or sharp edges. Do not hang the
cable off the table or counter.
WARNING! Risk of electrocution!
Device may cause injuries due to improper installation!
Before installation, check the data of the local power grid with the technical specifications of the unit (see
nameplate).
Connect the device only if they match! Follow the safety instructions!
WARNING! Hot surface!
During operation, some parts of the device become very hot. To avoid burns, do not touch hot parts!
• Do not use this device if it is not working properly, is damaged or has been dropped.
• Do not use any accessories and spare parts which are not recommended by the manufacturer. These
could pose a hazard to the user or cause damage to the device and cause personal injury, and also void the
warranty.
• Do not lay the cable over carpets or other heat insulation. Do not cover the cable. Keep the cable away
from work areas and do not immerse it in water.
• Do not move the device during operation and do not tip it over.
• Never heat food or liquids in sealed containers or bottles. This builds up a pressure which can cause the
container or bottle to explode.
• The combo plates must not be used as a storage area. Accidental activation or residual heat can cause
objects left there to melt or burn.