NAVCAM-FHDWD
USER MANUAL
5
NavCam-FHDWD Manual Ver 2.1 09/ 2013
WHAT’S IN THE BOX
Navig8r Crash Cam FHDWD, Windscreen Suction-cup Mount, USB Cable, HDMI Cable, 12v
DC Car Charger, User Manual
FEATURES AND OPERATION
Memory Card required for operation
The CRASHCAM-FHDWD requires a Micro SD card (not included) to record video/ image
content.
(See page 11 for a table showing SD card capacity and the relevant amount of
video/ image content able to be stored).
For optimal performance, we recommend using a
Class 6or 10 Micro SD card to ensure fast data transfer rates (Class 4 cards will still work
however may result in slower transfer rates).
Power on/ off function (auto on/ off)
To turn on the CRASHCAM-FHDWD, press and hold the power button on the top of the
device. To turn off, press and hold the same power button.
When connected to the 12v DC socket (cigarette socket) of your car, the CRASHCAM-
FHDWD will turn on and off automatically when the car’s ignition is turned on or off. If the
CRASHCAM-FHDWD does not turn off immediately it means the device is completing the file
save process before turning off (usually only a few seconds).
Note: If the 12v socket is “constant on” (in some European vehicles), then the CRASHCAM-
FHDWD will need to be turned on/ off manually by the power button or removing the 12v
plug.
Whilst connected to the car’s 12V DC socket (or from a powered USB hub or PC USB port)
the LED indicator will glow blue (battery is charging) and will be off once the battery is fully
charged. (note – the device’s battery will not charge if connected to a PC USB port)
Installation on the car windscreen
The CRASHCAM-FHDWD works best when mounted centrally and high up on the windscreen
(typically behind or close to the rear vision mirror). Use the supplied windscreen suction
mount to affix the CRASHCAM-FHDWD to the windscreen and then adjust the mount until
you can see a clear view of the road ahead on the LCD.
Recording
Turn on the CRASHCAM-FHDWD and press the
REC
button (unless auto REC on has been set
with ignition on). When recording commences, a flashing RED dot will appear in the LCD
together with separate timer readout. The recorded file is saved onto the Micro SD Card.
You can manually stop recording by pressing the
REC
or turning the car ignition off (stopping
power to the device).
