Crane SGV2002L, Installation And Operation Manual, Page: 36 / 38

BASIN INFORMATION (Cont.)
Method of Cable Entry into Basin: Direct Burial Cable W/Cord Grips
Conduit Coupling
Cable Sizes(s) from Control Panel to Basin:
(Example: 10/4 power cable and Two 18/4 Control Cables)
Valve at Sewer Main: Check Valve Manual shut Off Valve
JUNCTION BOX INFORMATION
Is Junction Box Dry: YES NO
Are All Cord Grips Tight: YES NO
Is Junction Box Cover Tight: YES NO
Are All Wire Connections Tight: YES NO
Are Pump Cords Away from Pump: YES NO
CONTROL PANEL INFORMATION
Is Interior Dry: YES NO
Are All Connections Tight: YES NO
Is Control Panel Mounted Securely: YES NO
COMPLETE THIS SECTION ONLY IF A PANEL NOT SUPPLIED BY BARNES IS BEING USED
Panel Manufactured by
Model Number:
Short Circuit Protection Type:
Circuit Breaker Fuse None
Short Circuit Protection Amp Rating(s): Amps
Overload Protection Amp Rating: Amps
Overload Protection Model:
Do Protection Devices Comply with Pumps Amp Rating:
YES NO
ELECTRICAL CHECK
Single Phase:
Voltage Supply at Panel Line Connection with Pump Off:
L1-L2_______Volts
(Must be within 10% Pump Rated Volts)
Three Phase:
Voltage Supply at Panel Line Connection with Pump Off:
L1-L2______Volts
L2-L3________Volts L3-L1________Volts
(Must be within 10% Pump Rated Volts)
ALL PUMPS:
Resistance of Pump Power Connections at Control Panel Terminal Strip with Power Off: +
Red/Black Ohms, Black/White Ohms, Red/White Ohms.
NOTE: Resistance Readings must be within 5%, compare to chart in pump operation manual.
Resistance Between Ground Lug in Panel and Outside Pump Case/Rail:
NOTE: Resistance Reading Should Indicate Less Than 1 Ohm.
Ohms.