SUSPENDED PUMP SYSTEMS
Remove four hex nuts (30) and lockwashers (11) from volute (28) (see Figure 11) and remove volute (28) and
rotate 90° clockwise. See Figure 14, so that the discharge is 90° from tapped holes in motor housing (10). Replace
hex nuts (30) and lockwashers (11) and tighten. Place Suspended Bracket (61) on motor housing (10) and insert
two cap screws (57) and two lockwashers (58) and tighten.
Attach the pump cover to the top of the bracket. Then connect the discharge pipe (by others) to the pump. Mount
the float switches to the discharge pipe and pull the pump cord sets and the float switch cords through the cord
grips attached to the pump cover. The pump with cover can now be lowered into basin.
PARTS LIST:
ITEM
QTY.
DESCRIPTION
PART No.
57
2
Hex Hd. Cap Screw
1-32-1
58
2
Lockwasher
20-14-1
61
1
Suspended Bracket
Basin Depth 36"
071753
Basin Depth 48"
071754
Basin Depth 60"
071755
Basin Depth 72"
071756
Basin Depth 84"
071757
Fig. 14
29
Summary of Contents for SGV2002L
Page 18: ...Fig 10 2HP SGV SERIES 18 ...
Page 19: ...2HP SGV SERIES Fig 11 19 ...
Page 24: ...3 5 7 5HP SGV SERIES Fig 13 24 ...
Page 32: ...NOTES 32 ...
