Crane EE-9004, Manual

Page: 15 / 28

15
• You may sanitize the parts through a sterilization method of your choice after each
use.
• Parts may become damaged or deform if exposed to high temperatures for any
more than 5 minutes.
• Make sure that you check on wear and tear on tubes and all plastic or silicone
parts.
• Replace worn out or damaged parts immediately as this will affect suction.

Allow to air-dry thoroughly. Place sanitized pump parts and bottle brush on a clean,
unused dish towel or paper towel in an area protected from dirt and dust. Do not use
a dish towel to rub or pat items dry because doing so may transfer germs to the
items.
• Make sure that all parts are totally dry prior to use. Wet or damp parts will cause
poor suction. Once all parts are totally dry, re-assemble the milk collection kit.
You will need to re-assemble your milk collection kit after each cleaning.
Before assembling, the parts which directly come in to contact with breast
milk must be cleaned and sterilized before each use. These parts include;
the milk bottle, Silicone 3D Cushions, breast shield body,
diaphragm and bottle lid.