Crane EE-9004, Manual

Page: 11 / 28

11
Connecting the Pump Unit to
the Milk Collection Kit
Insert the tubing connector into the air
vent on the diaphragm cap. Then insert
the other end of the tubing with the
connector into the pump unit.
If you are double pumping, connect the 2 nd
tubing into the 2 nd milk Collection kit and
insert the tubing with the connector into
the pump unit.
Note: for single pumping only attach 1
tube and insert tab to close off the other
port.
Ensure the tubing is securely connected to the pump unit and the milk Collection kits.
Connecting the Pump Unit to Power
To Connect to the power supply, plug the A/C adaptor into the wall outlet.
Attach the power cord to the back of the pump unit . Fully charge the pump unit
before using for the first time.
Li-ion Polymer Battery Power Supply/Charging
Your Crane Double Electric Breast Pump can operate on built-in battery or power
outlet. The built-in rechargeable battery charges fully after about four and a half
hours. Do not charge for more than 6 hours. From a full charge your pump can work
continuously for about 2 hours.
When the battery power is low, battery indicator will flash to indicate the battery
needs to be charged. Charging the battery before it is fully drained will protect the li-
ion polymer battery. When the battery is fully charged, it will stop charging
automatically to avoid damage to the li-ion polymer battery
.