Crane EE-9004, Manual

Page: 13 / 28

13
Milk Collection Kit:
Wash and sanitize the Milk Collection Kit before your first use. Sanitize daily and
wash after each use. The breast pump milk collection kit has a closed system
therefore cleaning the tubes is not necessary. If you happen to see moisture in the
tubes alter pumping, remove the tubes from the breast shields. Turn on the motor
for a few minutes until the moisture is gone
.
Pump unit:
Wipe pump unit with clean damp cloth. Sterilize the unit using a disinfectant wipe
and wipe off the outside of the tubing and the tubing jack (where tubing attaches to
the pump unit). NEVER submerge the pump unit in water or use in a sterilizer.
First time using your breast pump
Carefully read this instruction manual before using your Crane Double Electric Breast
Pump. Failure to follow these instructions and safety guidelines can lead to harm or
injury from the device and may also damage the pump and kit.
• Wash your hands with soap and warm water.
• Disassemble all parts that come into contact with the breast/breast milk: Breast
shield body, silicone cushions & diaphragms & bottles & bottle parts
NOTE: silicone cushion comes assembled onto the breast shield.
• Sterilize these parts using by boiling for 3-5 minutes or with another sterilization
technique. See ‘ STERILZING YOUR PUMP PARTS’ for more information.
• Leave to dry or dry with a clean cloth or paper towel .
STERILIZING YOUR PUMP PARTS
BEFORE FIRST USE AND ONCE DAILY
Place disassembled breast shield, silicone cushions, diaphragm, bottle and
bottle parts that are safe to boil into a pot and cover with water.
DO NOT
BOIL TUBES AND CONNECTORS .
1. Put the pot over the heat and bring to a boil.
2. Boil for 3-5 minutes.
3. Allow water to cool and gently remove items with clean tongs
4. Do not boil tubes or connectors
5. Allow to air-dry thoroughly. Place sanitized pump parts and bottle brush on a
clean, unused dish towel or paper towel in an area protected from dirt and dust.