Crane BevMax 4, Technical Manual

Page: 28 / 103

27
PRICE DISPLAY
-
Key “4”
This setting controls whether the vender displays a
price when a selection is made. Machines with a
card reader capable of displaying selection prices
may be configured to prevent displaying prices on
two separate displays. Press the number “4” on the
keypad and display will show “Price Display”. Press
the “
” ” Key and display will show “Price Display: On
(Off). Press “ ” ” - turn Off (On). Press the “ ” ” Key
to toggle or press the “CLR” key to exit without
making changes and return to “PRICE DISPLAY”.
Press “CLR” to return to “SETUP MODE 2”.
STORAGE TEMP ENABLE/DISABLE
–
Press key “5”
Press key 5 and display will show current state
“Storage Temp Enable (Disable). Press “
” ” Key
and display will show “Storage Temp On (Off).
Press “
” ” - turn Off (On). Press the ” Key to toggle
or press the “CLR” key to exit without making
changes and return to “STORAGE TEMP
ENABLE/DISABLE”. Press “CLR” to return to
“SETUP MODE 2”.
INTERVAL CLEARING
– Press key “6”
This function is used to indicate the state of the
interval clearing setting. Press the number “6” key
and “INTERVAL CLEARING” will show on display.
Press the * Key and display will show Interval Clear:
Off (On). Press
” - turn On (Off). When turned
“ON”, the interval (resettable) data will automatically
be cleared upon successful completion of a DEX
audit. When turned “OFF” it allows for remote
auditing devices that clear resettable data manually
to be used to clear the data. Press the
” Key to
toggle or press the “CLR” key to return to
“INTERVAL CLEARING”. Press “CLR” to return to
“SETUP MODE 2”.
SET LIGHTS OFF – Press key “7”
The function is used to turn on the “SET LIGHTS
OFF TIME” set in “SETUP MODE 1”. Press the
number “7” key and “SET LIGHTS OFF” will show on
display. Press the “
” ” Key and display will show
“Lights Off: Off (On). Press “
”
” - turn On (Off).
Press the * Key to toggle or press “CLR” to return to
“SET LIGHTS OFF”. Press “CLR” to return to
“SETUP MODE 2”.
DOUBLE TALK
– Press key “8”
The function is used to turn on or turn off the
“Double Talk” feature. Press the number “8” key and
“Double Talk” will show on display. Press the “
”
”
Key and display will show current state “On” or “Off”.
Press “
” ” to toggle from On to Off. With the display
showing the state you wish the mode to be in, press
the “CLR” key to return to “Double Talk”. Press
“CLR” to return to “SETUP MODE 2”.
SET STORAGE TIME
– Press key “9” ”
This function is used set the Time, Date, and Day
when Storage Temperature will be ON. Press the
number “9” and “SET STORAGE TIME” will show
across display. Set Storage Time can be set in the
same manner as “SET NOT AVAIL TIME” covered in
the Initial Programming Section of this manual.
SET STORAGE TEMP – Press key “0” ”
This function is used to set Storage Temperature.
Press the number “0” key and “SET STORAGE
TEMP” will show on display. Set Storage Temp can
be set in the same manner as “SET
TEMPERATURE” covered in “SERVICE MODE”
section of this manual.
SETUP MODE 3
Enter SETUP MODE 3 by opening the main door
and pushing the Service button five times. The
display will read “SETUP MODE 3”.
IMPORTANT: This mode is only used when using an
EXE (Executive) Coin Mech.
NEXT ITEM
-
Press key “A”
EXE or MDB
-
Press key “B”
Configures the Vender Controller for MDB or EXE
(Executive) peripheral communication. Toggles
Controller Setting from “EXE Active? Off” to “EXE
Active? On”. When Off, then the controller will
communicate with MDB peripherals. When On, then
the controller will communicate with EXE (Executive)
peripherals.
Press the letter “B” on the keypad. The display will
show “EXE or MDB”. Press the “
” ” Key, the current
state of “EXE Active? Off” or “EXE Active? On” will
show on display. Press the “
”
” Key, to toggle from
“EXE Active? Off” to “EXE Active? On”. With the
setting you wish to use showing on display press the
CLR Key to return to “EXE or MDB”. Press the
“CLR” key to return to “SETUP MODE 3” or press
the “A” key to advance to the next menu item below.
SET PRICING MODE
-
Press key “C”
This menu is used to set the price mode to either the
Vending Machine Controller holds the prices or the
EXE Coin Mech holds the prices.
Toggle Controller Setting from “Price Holding: Off” to
“Price Holding: On”. When Off, the Vending
Machine Controller holds the selection prices. When
On, then the EXE (Executive) Coin Mech holds the
selection prices.
Press the letter “C” on the keypad. The display will
show “SET PRICING MODE”. Press the “
” ” Key,
the current state of “Price Holding: Off” or “Price
Holding: On” will show on display. Press the “
” ”
Key, to toggle from “Price Holding: Off” to “Price
Holding: On”. With the setting you wish to use