Crane Barnes SE51 Series, Installation Manual

Page: 11 / 20

11
SINGLE PHASE, 115/230 VOLT AC (PSC)
Power Cable (12) Motor Lead Number
Green (Ground)
Green
Black 1
White 2
Flag Connector Capacitor
Flag Connector Capacitor
SECTION: G REPLACEMENT PARTS
G-1 ORDERING REPLACEMENT PARTS:
When ordering replacement parts, ALWAYS furnish the
following information:
1. Pump serial number and date code. (Paragraph G-4)
2. Pump model number. (Paragraph G-3)
3. Pump part number. (Paragraph G-2)
4. Part description.
5. Item part number.
6. Quantity required.
7. Shipping instructions.
8. Billing Instructions.
G-2 PART NUMBER:
The part number consists of a six (6) digit number, which
appears in the catalog. A one or two letter suffi x may follow
this number to designate the design confi guration. This
number is used for ordering and obtaining information.
G-3 MODEL NUMBER:
This designation consists of numbers and letters which
represent the discharge size, series, horsepower, motor
phase and voltage, speed and pump design. This number
is used for ordering and obtaining information.
G-4 SERIAL NUMBER:
The serial number block will consist of a six digit number,
which is specifi c to each pump and may be preceded by
an alpha character, which indicates the plant location.
This number will also be suffi xed with a four digit number,
which indicates the date the unit was built (Date Code).
EXAMPLE: A012345 0490 .
Reference the six digit portion (Serial Number) of this
number when referring to the product.
FIGURE 9
Manual Index