Crane 3800-6 Programming Manual Download

Page: 70 / 101

Page

101

BROWSE CATEGORIES

Touch Browse Categories Menu Bar to access the Menu to enable or disable

Categories.

Touch Browse All Products Menu Bar to toggle Off/On. When On this feature

allows the consumer to browse the contents of a Library or Planogram by

Category, Drinks, Snacks etc. The Category's must be defined when the

Library or Planogram is created. Also the Skip Main Menu option must be

turned off under the special vend modes menu heading.

PORT SENSOR / PICKER SENSOR

Touch Port Sensor or Picker Cup Sensor Menu Bar to toggle the selected

Sensor Off/On.

Note: when both are off, if a product is not dispensed, the Customer losses
their credit unless a vend mech error occurs.

The Port Sensor when On will sense product placed in the Port and/or

removed from the Port.

The Delivery (Picker) Cup Sensor when On will sense product placed in the

Cup and/or removed from the Cup.

SPECIAL VEND MODES

Special Vend Modes provides access to:

•

Alternative Vending

•

Free Vend

•

Token Enable

•

Winner Mode

•

Combo Vends

•

Trade Show Vend Bypass

•

Rapid Vend

•

Skip Main Menu

•

MultiVend Discount

•

Picker Cup Dance

Summary of Contents for 3800-6






































































































Search results

Summary of Contents for 3800-6

Reviews:

Related manuals for 3800-6

Brands by name

Popular brands

Crane 3800-6, Programming Manual

Search results

Summary of Contents for 3800-6

Reviews:

Related manuals for 3800-6

Brands by name

Popular brands