Crane 130182, Manual

Page: 2 / 10

2
TABLE OF CONTENTS
SAFETY FIRST ............................................................................................... 3
A. SERVICE and REPAIR ....................................................................................4 - 11
SPECIAL TOOLS AND EQUIPMENT
INSULATION TESTER (MEGGER)
DIELECTRIC TESTER
SEAL TOOL KIT (107271)
PRESSURE GAUGE KIT (085343)
This manual covers the following models, there may be extra parts not
needed for your specifi c model. If additional parts not included in this kit are
required, please consult the explicit manual for your pump at:
http://www.cranepumps.com/downloadables/CATALOGS_OIPMs/PARTBOOK/BARNES.pdf
Series: 3SE-HD - Manual 107948, 133460
Series: 3SE-L - Manual 088774, 133410
Series: 4SE-SS - Manual 088688
Other brand and product names are trademarks or registered trademarks of their respective holders.
® Barnes is a registered trademark of Crane Pumps & Systems, Inc
1999, 2002, 11/03, 6/05, 4/06 , 9/06, 2/07
Alteration Rights Reserved
Seal Repair Kit ...... P/N - 130182
( †)
Service Kit ............. P/N - 130209
( ♦)
PARTS INCLUDED IN KIT
QTY PART NO. DESCRIPTION
1 017026 †♦ O-Ring
1 062641 †♦ Pull Washer
1 061829 †♦ “V”-Ring
2 033730 †♦ Square Ring
1 062435 †♦ Mech Seal
3 079318 ♦ Wire Connector
1 057882 ♦ Retaining Ring
1 035589 ♦ Shaft Key
1 038132 ♦ Jam Nut
1 20-24-1 ♦ Washer
1 053746 ♦ Ball Bearing
6 055844 ♦ Wire Connector
6 052990 ♦ Wire Connector
1 070320 ♦ Impeller Washer
1 105149A ♦ Jumper Wire
1 105150 ♦ Wire Crimp Connector
1 111951 ♦ Barrel Crimp Terminal
1 2-31051-224 †♦ O-Ring
1 105197 ♦ Retaining Ring