CRANE PUMPS & SYSTEMS Barnes PGPT Series, User Manual

Page: 4 / 16

4
DISCHARGE ....................... 1¼” NPT SCH 80, 300 Series SS
CHECK VALVE ................... 1¼” NPT Cast Iron
Style
................ Flapper with Integrated Anti-Siphon
LIQUID TEMPERATURE .... 104°F (40°C) Continuous
MOTOR HOUSING ............. Cast Iron ASTM A-48, Class 30
VOLUTE .............................. Cast Iron ASTM A-48, Class 30
SEAL PLATE ...................... Cast Iron ASTM A-48, Class 30
IMPELLER .......................... Stainless Steel
SHREDDING RING ............. Hardened 440C Stainless Steel
Rockwell® C-55
CUTTER .............................. Hardened 440C Stainless Steel
Rockwell® C-55
SHAFT ................................. 416 Stainless Steel
SQUARE RING ................... Buna-N
O-RINGS ............................. Buna-N
HARDWARE ....................... 300 Series Stainless Steel
PAINT .................................. Air Dry Enamel
SEAL
Design
............. Single Mechanical, oil filled reservoir
Material ........... Rotating Face - Silicon-Carbide
Stationary Face - Silicon-Carbide
Elastomer - Buna-N
Hardware - 300 Series Stainless Steel
CORD ENTRY ..................... 20ft. (6m) Cord with Plug,
Custom Molded Quick Connect
for Sealing with Strain Relief.
CORD .................................. 14/3 CSA/UL Approved SOW
SPEED ................................ 3450 RPM, 60Hz
UPPER BEARING:
Design ............. Single Row, Oil Lubricated
Load
................ Radial
LOWER BEARING
Design ............. Single Row, Oil Lubricated
Load ................ Radial & Thrust
MOTOR Design ............. NEMA L, Oil Filled,
Squirrel Cage Induction
Insulation ........ Class F
Type ................ Capacitor start/capacitor run
LEVEL CONTROLS:
A Series .......... Pipe Mounted, Piggy-Back
Mechanical with 240V Plug
OPTIONAL EQUIPMENT .... Additional cord
PUMP SPECIFICATIONS:
inches
(mm)
· ·
· ·
20.39
[518]
16.82
[427]
4.09
[104]
11.10
[282]
5.63
[143]
4.41
[112]
8.81
[224]
9.00
[229]
120°
PUMPING
DIFFERENTIAL
FLOAT MUST BE
SECURED BEFORE
OPERATION!
SEE INSTRUCTIONS
INCLUDED WITH
FLOAT!
MANUAL AUTOMATIC
1.07
[27]