SECTION: A- PUMP SPECIFICATIONS
DISCHARGE:
2" (50.8mm) NPT, Vertical
LIQUID TEMPERATURE:
104°F (40°C) Continuous.
VOLUTE:
Cast Iron ASTM A-48, Class 30.
MOTOR HOUSING:
Cast Iron ASTM A-48, Class 30.
SEAL PLATE:
Cast Iron ASTM A-48, Class 30.
IMPELLER:
Design:
E Series
- Three Vane, Open With
Pump Out Vanes On Back Side.
H Series
- Single Vane, Enclosed.
EH Series
- Two Vane, Open with
Pump Out Vanes On Back Side.
Material:
E Series
- Cast Iron ASTM A-48,
Class 30.
H Series
- Polypropylene with
Threaded, 300 Series Stainless Insert.
EH Series
- 85-5-5-5 Bronze.
Dynamically Balanced, ISO G6.3.
SHAFT:
416 Stainless Steel
SQUARE RINGS:
Buna-N
HARDWARE:
300 Series Stainless Steel
PAINT:
Air Dry Enamel.
SEAL:
Design:
Single Mechanical, Oil-Filled
Reservoir, Secondary Exclusion Seal.
Material:
Rotating Face - Carbon
Stationary Face - Ceramic
Elastomer - Buna-N
Hardware - 300 Series Stainless
CABLE ENTRY:
15 ft. (4.5M)Cord. Pressure
Grommet for Sealing and Strain Relief
.
SPEED:
3450 RPM (Nominal).
UPPER BEARING:
Design:
Sleeve
Lubrication:
Oil
Load:
Radial
LOWER BEARING:
Design:
Single Row, Ball
Lubrication:
Oil
Load:
Radial & Thrust
MOTOR:
Design:
NEMA L-Single Phase, NEMA B-Three
Phase Torque Curve. Completely
Oil-Filled, Squirrel Cage Induction.
Insulation:
Class
A
SINGLE PHASE:
Permanent Split Capacitor (PSC).
Includes Overload Protection In Motor.
THREE PHASE:
Dual Voltage 230/460;
Requires Overload Protection to be
Included in Control Panel.
OPTIONAL EQUIPMENT:
Seal Material, Impeller Trims,
N/C Temperature Sensors with
cable for 3 phase pumps (Requires
Relay in Control Panel),
Additional Cable, CSA Listed.
inches
(mm)
2.00" (51) NPT
DISCH.
18.00
(457)
6.16
(157)
13.50
(343)
7.00
(178)
1.64
(42)
4.84
(123)
9.68
(246)
4
