9
When you first login to the browser, you will see the Home Page.
You can get back to the Home Page by
clicking on the “Home” Icon at any time.
There are 6 Web Pages that can be navigated to:
•
TCI Network Settings
•
Wrench Status
•
Log View
•
RF Settings
•
Jobs Settings
•
Global Settings
The Home Page will give the serial number of the TCI, and its current software versions for the main processor
and RF module.
There are 2 Comms Modes:
•
Open Protocol (used by a variety of manufacturing systems)
•
Standalone (when the factory network breaks down or if a simple manufacturing system)
The default IP and Port address is 192.168.0.101:80. The TCI returns to this IP address after a Factory Reset.
(Selecting Open Protocol variant 2 in global settings changes this default to 192.168.0.165)
Note:
Before you plug the TCI into a corporate network, please involve the IT department to avoid IP conflicts.
The Web Pages are viewable on common web browsers such as MS Edge, Firefox, and Chrome. Internet
Explorer is not recommended.
To alter settings then you must “Login”. (See next picture)
TCI WEB PAGES
