Safety Information
General Safety
-
Read these instructions carefully
-
Keep these instructions
-
Heed all warnings
-
Follow all instructions
-
Do not use this apparatus near water
-
Clean only with a dry cloth
-
Do not block any ventilation openings and install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that
produce heat.
-
Do not defeat the safety purpose or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades with a third grounding prong. The wide blade or the 3rd prong are provided for your
safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
-
Only use attachments/accessories recommended by the manufacturer.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Do NOT modify this unit, altercations may affect performance, safety and/or international compliance standards.
-
Cranborne Audio does not accept liability for damage caused by maintenance, repair or modification by unauthorized
personnel.
Installation notes
-
Ensure that no strain is placed on any cables connected to this apparatus. Ensure that all such cables are not placed where
they can be stepped on, pulled, or tripped over.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
ATTENTION: Afin de réduire les risques de choc électrique, ne pas exposer cet appareil à l’humidité ou à la pluie.
Power Safety
-
The unit is supplied with an external power supply and suitable mains lead. Only use the supplied external power supply,
however if you decide to use a mains lead of your choice, bear in mind the following:
-
Refer to the rating label of the unit and always use a suitable mains cords.
-
The unit should ALWAYS be earthed with the earth on the IEC socket.
-
Please use compliant 60320 C13 TYPE SOCKET. When connecting to supply outlets ensure that appropriate sized
conductors and plugs are used to suit local electrical requirements.
-
Maximum cord length should be 4.5m (15’)
-
The cord should bear the approval mark of the country it is to be used.
-
Connect only to an AC power source that contains a protective earthing (PE) conductor.
-
Only connect unit to single phase supplies with the neutral conductor at earth potential.
GB
The apparatus shall be connected to mains socket outlets with a protective
earthing connection.
DEN
Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver
forbindelse til stikproppens jord.
FIN
Laite on lilettävä sojamaadoituskoskettimilla varustettuun pistorasiaan.
NOR
Apparatet må tilkoples jordet stikkontakt.
SWE
Apparaten skall anslutas till jordat uttag.
ATTENTION: Un-earthed metal parts may be present inside the enclosure. No user serviceable parts inside - to be
serviced only by qualified personnel. When servicing, disconnect all power sources before removing any panels.
