Remote Monitoring With N22H and N22
This hardware setup diagram will get N22H connected to a passive N22 for advanced remote
headphone monitoring and stagebox connectivity.
1) Connect N22H’s C.A.S.T. Output [13] to the C.A.S.T. Input of N22 using shielded Cat 5e, Cat 6,
or Cat 7 cable.
i)
A fully shielded connector is required in order to pass 48v correctly.
2)
Connect balanced Mic/Line sources to the combi jack inputs [4] of N22H.
3)
Select the ‘C.A.S.T.’ input option using the Source Switch [6].
4) Connect headphones to N22H’s headphone output [2].
i)
If using battery power, the unit will power on automatically when headphones are
connected.
ii)
If using mains power, N22H powers on automatically when power is detected.
5) Connect the XLR outputs of N22 to the Preamp Inputs of your recording device or Audio
interface.
6) Connect the Input of N22 to the line outputs of your recording device or Audio interface.
Once connected, mic/line sources connected to N22H will travel through the C.A.S.T. connection
and arrive at the inputs of the device for processing whilst the mix created on the other C.A.S.T.
device travels directly to N22H’s headphone output for monitoring. Adjust headphone level [1] to
taste.
