In the above diagram, N22H is connected to a 500R8 as a remote stagebox via C.A.S.T. with full
48v Phantom Power support.
1. Connect the C.A.S.T. Output of N22H to the C.A.S.T. Input of 500R8/500ADAT.
2. Set the source switch of 500R8/500ADAT to receive C.A.S.T.
3. Connect your DI box or condenser microphone to N22H’s Inputs [4].
4. Engage 48v on the preamps installed into 500R8/500ADAT and adjust preamp Gain and
settings to suit the source.
Now you can now record all signals connected to N22H’s input as normal as though they are
connected via a single XLR cable.
Note:
Please ensure that C.A.S.T. Outputs are connected to C.A.S.T. inputs of the next
device and vice versa. Mismatching connections and connecting Inputs to
Inputs or Outputs to Outputs C.A.S.T. can cause serious harm to downstream
equipment - especially when using 48v Phantom Power. Any damage caused to
the unit as a result of unsupported connections is not covered under the
Cranborne Audio warranty.
