Outputs [3]
The Outputs [3] are TRS outputs that are used when
N22H is connected via C.A.S.T. These outputs receive
signal from the device connected at the other end of the
C.A.S.T. system.
N22H’s Outputs are always patched to the RR Input paths
of the C.A.S.T. connectors for remote patching and other
operations with C.A.S.T. enabled devices. They also work
passively and so do not require N22H to be powered on to
operate.
When the Source Switch [6] is set to ‘C.A.S.T.’, both the
headphone amplifier and Outputs [3] of N22H receive the
same signal from the C.A.S.T. system.
In the above diagram, the C.A.S.T. Output [14] of N22H is connected to the C.A.S.T. Input of an N22
using a shielded Cat 5e, Cat 6, or Cat 7 cable.
Audio connected to the inputs of N22 (or any other C.A.S.T. device) will arrive at N22H’s Outputs [3]
recording or patching elsewhere. N22H’s Outputs can accept balanced mic/line signals as well as
unbalanced line signals.
