GALOPPINO
USAGE AND MAINTANENCE MANUAL
Manual no.
Ed.
Date
Pag.
MCA1001-EN-ED05
05
12/09/14
7/31
This document is the property of CRAMARO TS s.r.l. and cannot be reproduced, even if only partially, without the written authorisation
of the company
Pag 7
1
2
3
STD. CONTROL UNIT CODE 4WCE4C03031A
CONNECTION DIAGRAM
TO THE MOTOR
TO THE MOTOR
TO THE CONTROL
UNIT
1) CONTROL UNIT
2) BATTERY POWER SUPPLY CONNECTOR 3 ) ELECTRIC CONTACTS UNIT
CONTROL UNIT ELECTRICAL CONNECTION DIAGRAM
The control unit has 4 connection elements, 2 for the motor
and 2 for the battery. The connection must be carried out with two
electric cables, one of which is directed to the tarpaulin's motor,
while the other one is to the power supply circuit. Both cables are
tightened with cable glands inserted in a plastic boss with
a water-repellent gasket.
CONNECTION DIAGRAM
– CONNECTION:
Staple the FASTON cables with eyelet
on the cable whose insulation
has been removed beforehand.
Insert the FASTON cables
as shown in the figure and tighten the nuts.
Attach the plastic boss
with the 4 screws supplied and
tighten the CABLE-GLANDS.
12V 24V
